C
Credit Suisse
Guest
Unregistered / Unconfirmed
Directions on the best way to utilize the EMV Chip Composing Programming:
1 - Begin your PC/PC
2 - Whenever is done run EMV as administrator in a similar envelope with the remainder of the files,You will see a container asking you for your Permit key Enter your permit key and permit to the product 1/2 Min for the total establishment.
3 - Associate your equipment to your PC From the product Point of interaction Select your equipment and press interface it is associated then the product will show you a popup with the associated Equipment.
4 - From the product interface select your card organization and press Check USB Port a popup will show you the associated com port.
5 - Select your kind of card Visa,MasterCard And so forth…
6 - Press the Button Create ARQC Key (this will produce a one of a kind ARQC Key)
7 - Press Create Expert Key (This will Produce an Expert Key)
8 - Check the Container Create Another ICVV For Each Transaction,Accept EPI MCI Credit Debit,Accept ARPC Key,Store ARPC Key,USE EMV Tag and ICVV.
9 - Press the button Really take a look at ARQC Key and Check Expert Key.
10 - Select The Card Termination Information (The day isn't Significant Just the Month and Year)
11 - Enter The Pin code assuming that you have it (to involve the card in POS then the PIN Isn't Required yet in the event that you will jump at the chance to involve the Card in ATM, You want the Pin code)
12 - Enter Track 1 and Track 2 Consideration THE TRACK 2 Should BE WITH D not = Model 1234567891085696D1465446886489484 Not 1234567891085696=1465446886489484, in light of the fact that the product will consume the information over your EMV Chip in .hex configuration since the POS/ATM is conveying in .hex not txt.
13 - Presently press Substantial information a popup will appear with the information you write in the product interface kindly check in the event that is right on the off chance that it is, press Consume card Button and permit the product 30/1 Min for it to consume the information over the EMV Chip.
14 - Press the button EXIT to leave the software,IMPORTANT DON'T Take OUT THE CARD WHEN THE Product IS OPEN Leave THE Product THEN YOU Take OUT THE CARD.
15 - Read the card an addition and check whether everything is acceptable for this basic run the product as admin,inter your card in the Equipment and from the product interface press the button Read Card permit it 15/30 sec and the information will appear in the event that everything is alright.
Presently you are prepared to involve the card in any POS/ATM.
